Call 800-505-5058 info@vikingequip.com

Shop Equipment

Ensure that that your shop is up to date with all the equipment you need for performing high quality service. We’re your leading dealer in Connecticut including Hartford, Stamford, Bridgeport and New Haven.

AFF Model 3309A

10 ton capacity mid-rise truck jack stand

Standard Features:

  • Pin-type post adjusts to seven height positions from 18 1/2” to 30”
  • Large 3 1/8” x 5 3/8” support saddle and wide 17” x 17” base
  • Convenient carrying handle

AFF Model 3310A

10 ton capacity high-rise truck jack stand

Standard Features:

  • Heavier duty, pin-type post adjusts to ten height positions from 18” to 47”
  • Large 3 1/8” x 5 7/8” support saddle and stable 16” x 16” base

AFF Model 3312

Heavy duty 12 ton capacity truck jack stand

Standard Features:

  • Notched saddles for use with unitized body vehicles
  • Safety ratchet prevents lowering when saddle is loaded
  • Convenient handle for column release and carrying
  • SS12 has 12” x 10 3/4” base
  • 12 ton capacity

AFF Model 3315A

4000 pound capacity under-hoist stand

Standard Features:

  • 4000 pound capacity under-hoist stand
  • Adjusts from 55” to 85 1/2”
  • Ideal for exhaust and suspension work
  • Bearing included for smooth operation
  • Easily disassembles for storage
  • 24” x 24” x 24” base
  • Not intended to support entire vehicle
  • Ship weight 44 lbs.

AFF Model 3320A

1650 pound capacity under-hoist stand

Standard Features:

  • 1650 pound capacity under-hoist stand
  • Adjusts from 54 1/2” to 80 1/2”
  • Foot-operated lever for extra lift
  • Bearing included for smooth operation
  • 12” diameter base
  • Not intended to support entire vehicle
  • Ship weight 36 lbs.

AFF Model 3830

12 Ton Capacity Bench Press

Standard Features:

  • 12 ton capacity bench press
  • Compact, bench style press for light duty applications
  • Rugged hydraulic hand pump with hose and fittings

AFF Model 812

12 Ton Capacity Floor Press

AFF Model 820A

20 Ton Capacity Floor Press

AFF Model 832A

30 Ton Capacity Floor Press

AFF Model 837

50 Ton Capacity Floor Press

AFF Model SS3/SS6

3 ton or 6 ton capacity jack stand

Standard Features:

  • Notched saddles for use with unitized body vehicles
  • Safety ratchet prevents lowering when saddle is loaded
  • Convenient handle for column release and carrying
  • SS3 has 7” x 7 1/2” base
  • SS6 has 9” x 10 1/2” base
  • Choose from 3 ton (SS3) or 6 ton (SS6) capacity

AFF Multi Purpose Bench Vises

Model 3194 – 4” Jaw Width Model 3195 – 5” Jaw Width Model 3196 – 6” Jaw Width

Standard Features:

  • Heavy Duty
  • Head and base rotate 360 degrees for easy work positioning
  • Replaceable flat and round steel pipe jaws
  • Dual lock downs prevent jaws from rotating inadvertently

AFF Swivel Bench Vise Model 3197

5” Jaw Width Extra Large Anvil Work Surface

Standard Features:

  • Heavy Duty
  • Machined anvil surface
  • Base rotates 360 degrees for easy work positioning
  • Replaceable steel jaws
  • Dual locking handles
  • Extra large anvil work surface
  • 5” Jaw Width

AFF Swivel Bench Vises

Model 3204 – 4” Jaw Width Model 3205 – 5” Jaw Width Model 3206 – 6” Jaw Width Model 3208 – 8” Jaw Width

Standard Features:

  • Heavy Duty
  • Machined anvil surface
  • Base rotates 360 degrees for easy work positioning
  • Replaceable steel jaws
  • Dual locking handles

Branick 7400 Strut Compressor

Branick has been supplying Strut service tools for over 30 years! With that kind of experience Branick can supply the best equipment to handle the wide variety of suspension systems.

The 7400 can handle the heaviest coil-over-shocks, the Ford F-150 and even the Toyota RAV-4 without need for additional adaptors. Extra long springs? Bring ’em on! Long, short narrow or angled, the 7400 will easily do the job! And we’re listening too… We’ve opened up the front of the 7400 for easier access and added longer handles for extra torque.

DeWalt 8in Heavy Duty Bench Grinder

Superior power for industrial grinding applications.

Standard Features:

  • 3/4 HP induction motor provides superior power for industrial grinding applications
  • Rugged cast-iron bast and motor housing provide durability and prolong life
  • Motor runs at 3,600 RPM for high speed material removal
  • Precision machined adjustable aluminum tool rests allow the user to accurately position work
  • AMPS (120V A/C): 4.2
  • Spindle diameter: 5/8”

DeWalt 8in Heavy Duty Bench Grinder

Superior power for industrial grinding applications.

Standard Features:

  • 3/4 HP induction motor provides superior power for industrial grinding applications
  • Rugged cast-iron bast and motor housing provide durability and prolong life
  • Motor runs at 3,600 RPM for high speed material removal
  • Precision machined adjustable aluminum tool rests allow the user to accurately position work
  • AMPS (120V A/C): 4.2
  • Spindle diameter: 5/8”

OTC Genisys Scan Tool

If you’re frustrated trying to read and understand the text displays on conventional scan tools, then the advanced Genisys Scan-tool will be a real eye-opener. Only Genisys gives you the diagnostic data, detail and color display that lets you work quickly to repair customer vehicles.

Standard Features:

  • New Asian and European coverage added for component wiring, circuit descriptions, component and control module locations
  • Engine, transmission, and ABS systems covered
  • Domestic, Asian, and
  • European vehicle coverage for vehicles on the road today
  • Powerful diagnostics software automatically detects out of range readings and describes the vehicle system most likely to be causing the condition
  • Now two powerful scan tools in one-System 2.0 and Global OBD II Modes
  • System 2.0 allows you to boot the tool in two modes
  • Genisys supports wireless printing with its optional infra red printer No. 3157. The genisys also supports existing OTC Monitor cables

OTC Model 1833

25 Ton Capacity Shop Press with hand pump

Standard Features

  • Raise and lower bed easily on this tough, economical press that is ideal for pressing rear axle bearings, piston pins, and more.
  • 25 ton capacity

OTC Model 1850

55 Ton Capacity Shop Press with hand pump

Standard Features

  • Raise and lower bed easily on this tough, economical press that is ideal for pressing rear axle bearings, piston pins, and more.
  • Hand-operated winch and cable mechanism adjusts lower press bolster.
  • 55 ton capacity

OTC StrutTamer Strut Compressor

Simply the most effective compressor for virtually any straight, conical, or offset spring.

Standard Features:

  • Simply the most effective compressor for virtually any straight, conical, or offset spring
  • Four-point locking jaws securely hold the spring in place
  • Open-ended design means you can take the strut in and out, quickly and easily
  • The arms adjust in and out, accepting many different sizes of springs (2-1/2″ to 10″ in diameter)
  • The arms adjust up and down, accepting many sizes of springs (2-1/2″ to 24″ vertical stroke)
  • The 3-bar handle allows easy compression and decompression of the spring
  • No need to change shoes for different size springs When used on the optional stand (No. 6582), it is very portable

Robinair Refrigerant Identifier Plus

Identifies refrigerant type and purges damaging air. In addition to dependable refrigerant identification, the ID Plus measures non-condensable gases (air) in the refrigerant and purges it directly from the tank or system.

Standard Features:

  • Displays the actual percentage of R-12, R-134a, R-22 and air in the system or tank
  • Gives you the option of purging air if a significant concentration is found
  • Hydrocarbon alarm sounds if flammable substances are sensed
  • On-board printer port allows you to connect a printer for hard copy of testing results
  • Gauge on panel shows system pressure
  • Fast and Accurate – Displays test results in less than a minute and passes the refrigerant only if it’s 98% pure. To assure consistent, rapid results, the units are not pressure/temperature dependent
  • Reliable Technology – The instruments use dependable infrared technology developed by Neutronics, Inc., to determine if the refrigerant is an acceptable type and is pure enough to be used
  • Unique Case Design – Puts all the components up front where you can see them at a glance, including the filter Contoured case can be held in either hand and rubber feet protect the vehicle’s finish

RTI ELF-1 Leak Finder

The latest advancement in EVAP leak detection. Superior ability to find a wider variety of automotive system leaks.

Find Leaks In:

  • EVAP Systems
  • EGR Valves
  • Fuel Injector O-Rings
  • Throttle Bodies and Gaskets
  • Fuel and Oil Leaks
  • Vacuum Lines and Fittings
  • Intake Manifold
  • Head Gaskets
  • Valves and Piston Rings
  • Vacuum Reservoirs
  • HVAC Controls
  • Hoses and Heater Cores

A. EVAP Port Fitting
B. Fog Diffuser – slows down and collects fog to detect wind and whistle leaks
C. Rubber Adapters – complete set of (8) assorted sizes
D. High Intensity “White” Light
E. 4 oz. of Patented Fluid – illuminating properties make leaks easy to find

  • NO Heat and NO Smoke! One-of-a-kind technology utilizes patented, safe, non-flammable, smoke-free process to find leaks. It looks just like smoke!
  • NO Nitrogen Required – Use air or Nitrogen
  • Meets OBDII Test Requirements
  • Higher generation rates fill systems quickly and reduce service time!
  • Multiple Pressure Settings (1-15 psi with safety default)-
  • Find more types of leaks than other systems.

RTI Tech Alert

RTI TechALERT. Technician Productivity Enhancement Technology. It just makes sense – the key to increased productivity is to keep technicians and their machines continually performing value-added work.

Standard Features:

  • Increase a shop’s value added effort – keeps the workforce engaged in direct servicing functions and helps increase car service volume per day.
  • Puts the technician in charge – provides instantaneous function status of RTI equipment during operation.
  • Up to four machines compatible – one technician can monitor up to four RTI machines simultaneously to maximize his/her productivity.
  • Several technicians can share and independently synchronize to the same machine – keeps high demand service machines in constant use to generate maximum revenue.
  • Made from hi-strength composite material
  • Impact and chemical resistant housing
  • Ergonomically shaped and lightweight for a ease-of-handling and use
  • Four easy-to-see LED’s
  • Sealed activation button
  • Internal wireless synchronization sensor

Tracerline Complete Leakfinder Kit

Finds all auto links! Pinpoints A/C, Oil, Fuel, ATF, PS, Hydraulics and Coolant Leaks.

Includes:

  • High Intensity, rugged 50-watt UV/Blue lamp
  • Syringe A/C dye injector with hose for R-134a
  • 1 oz. bottle of solvent-free universal A/C dye
  • 1 oz. bottle of All-In-One oil dye
  • 1 oz. bottle of coolant dye
  • 8 oz. bottle of GLO-AWAY dye cleaner, fluorescence-enhancing glasses and case

Tracerline EZ-Ject

EZ-Ject dye injector is the easiest, most accurate and most compact method of servicing a vehicle’s A/C system with dye.

Includes:

  • High Intensity, rugged 50-watt UV/Blue lamp
  • EZ-Ject injector with HBF-TP9870 universal A/C dye cartridge for serving up to 14 vehicles
  • HBF-TP3400 1 oz All-In-One dye for oil, fuel, ATF, PS and hydraulic leaks
  • HBF-TP3900 1 oz coolant dye
  • Fluorescence-enhancing glasses and plastic case

WA Model Parts Washer

For passenger and light truck

Standard Features:

  • High pressure, hot, soap, and water solution eliminate the need for toxic solvents
  • Automatic turntable and 360 degree jets
  • Easy front loading
  • Integrated oil skimmer
  • 32” x 43” inside dimensions
  • 500 lb load capacity

WA-TR Model Parts Washer

For heavy truck parts

Standard Features:

  • Oversized inside dimensions of 32” x 54”
  • 1000 lb load capacity
  • Automatic turntable and 360 degree jets
  • Easy front loading
  • Integrated oil skimmer

Connect With Our Team

Joe Shomberg